CA Glue Caddy Freezer Fridge Organizer Storage Cut from 2.7mm Plywood DYI Kit
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
$14.99
Fast Free Shipping
CA Glue last a long time when kept in the freezer. I store mime in the freezer and was tired of unknowingly tipping it over and having the bottles get glued to the freezer so I came up with this laser cut plywood holder that put a end to that.
No Glue Glue Caddy Holder Organizer Hanger Laser Cut from 2.7mm Plywood, DYI Kit. This is the glue holder that needs no glue for assembly! Just gently tap it together with a hammer or scrap piece of wood to assemble. I assembled the one in the photos with just a scrap 2 by 3 as a hammer. See numbered photos and instructions below for assembly.
Use to store CA Glue and Accelerator
Holds a combination of up to 4 bottles
Helps prevent glue from spilling
Fits up to 2 oz CA and accelerator bottles
Precision snug fit, needs no glue for assembly
Assembles in less than 2 minutes
Cut from 2.7mm Plywood, thick plywood using laser cutting technology
Assembly:
Slide the bottom and one slide together (see photos numbered 1 and 2)
Slide the top in place with the side and bottom (photo numbered 3)
Slide the other side in place.
The glue caddy should now look like the photo numbered 6 . . . all done!